“Two in one” is the key concept: CTE now offers the spider Traccess 230 in its standard version with basket and with winch, the special accessory suitable for lifting materials
Within few minutes the spider Traccess 230 changes: usually used with the basket for lifting materials and operators, now is also suitable for lifting materials with a special accessory, a winch with lifting capacity up to 250 kg at 20.8 m working height. Just a simple movement to remove the basket and apply the winch. The only difference between the standard use is that the winch can not rotate. For all other features, this new version has the same performance as the original and best known basket version.
The loading capacity of 250 kg is for all the 4 possible working areas with automatic leveling up to 10.1 m outreach (amazing outreach that allows to reach even the most difficult and uncomfortable working place): with the stabilizers open at 25 ° while working in the back area, with stabilizers open at 25 ° on one side and 50 ° on the other side while working only on one side (the third stabilization is in the opposite direction), finally you can work with all 4 stabilizers open.
With these 4 types of stabilization there won’t be obstacles for the work of the operator.
Traccess 230 is currently the highest CTE tracked access platform , with a working height of 23 m and 12 m outreach. Its very small dimensions ( 1,99 height and 5,28 m length, and most importantly just 80 cm width when in narrow track position) and quickly removable basket allow the TRACCESS 230 to get inside places which other 23 m tracked aerial platforms cannot access. Full radio remote controls are standard on the TRACCESS 230, as well as automatic leveling and four different outrigger footprints and operating modes, plus a 90° + 90° cage rotation.
It is also equipped with a Honda engine 15 hp (you can also mount the Kubota) plus an auxiliary motor 230 V-2, 2 kW (standard in the delivery) that will operate without emissions in indoor environments.
The articulated truck-mounted platform ZED 20 CSH is ideal for European market
The latest of the ZED family – CTE brand identifies the articulated arm with the “Z” shape – has been created to meet the international market that requires higher working heights even on 20 meters working heights: its peculiarity is in fact the increased capacity, or higher, in fact “CSH” has a load capacity of 250 kg, while the articulated platforms with 20 meters working height usually allow a maximum load capacity of 200 kg (the only model in Italy with these characteristics). In addition, this articulated model, as well as its mother ZED 20 CH, stands out for its technological innovations as the vertical stabilization works with drive rods: a CTE patented system that guarantees the exit of the beam, and consequently of the outrigger, in one movement, without the help of jacks and cylinders. This technology, already tested in model ZED 26 JH, guarantees a stabilization that allows you to get closer to the sidewalks and to avoid the sliding of the outriggers, the only drawback of stabilizing to A+A. It is perfect for all situations where you must work in tight and narrow spaces. The H stabilization also guarantees the exit of the stabilizer to allow the overcoming of obstacles (eg. sidewalks) up to 220 mm, much higher (83%) than the version A+ A (120 mm). The precious addition of the higher working height goes in the direction of all those users who require a basket able to carry greater quantities of material and the safe use even for strong build operators.
